P. I. T. Master PBH26 -C2 – price, reviews, characteristics, photos – buy in Moscow and the Russian Federation

Perforator P.I.T. Master PBH26-C2 1

Perforator P.I.T. Master PBH26-C2 at a price of 5 079 rubles: reviews 20, characteristics. Buy 350+ stores in 152 cities of Russia. Contactless delivery of goods and 100% delivery and warranty service.

Perforator P.I.T. Master PBH26-C2

Perforator P.I.T. Master PBH26-C2 1

Perforator P.I.T. The PBH26-C2 master is used for drilling and drilling holes in metal, wood or concrete. Suitable for household needs. The reverse rotation switch key is located next to the inclusion key. Due to the electronic adjustment of the speed of rotation, optimal work with materials of various densities is achieved. An additional handle can be installed in any position.

Technical characteristics P.I.T. Master PBH26-C2

The power of the perforator is an indicator of the productivity of the electric motor and electricity consumption. Standard unit of measurement – Tue. The power method is from the network, but there are models with the ability to connect a remote battery.

Since the punch is considered professional technology, its power varies from 450 to 1780 watts, battery models – up to 1000 watts.

The greater the power, the more effective the punch acts on the material (wood, steel, concrete), the higher the speed of rotation of the working element. Also high power determines the high energy consumption, a high level of return and vibrations, an increased level of noise exposure.

At the moment, there are 3 main operating modes of the perforator:

  • drilling
  • D some (hit)
  • Drilling with a blow

When drilling, the punch is used as a powerful drill. When drilling with a blow – it is recommended to create holes in particularly dense materials – the pneumatic principle of exposure facilitates the drilling of the canvas and reduces the time of work, soft materials deforms and destroy.

When the rotation of the storm does not occur,

An additional regime is the function of a screwdriver in the presence of a reverse.

Most models of perforators are protected from accidental switching modes during operation.

The impact force for the perforator indicates how powerful the unit effect of the working element on the material will be. It is calculated in units of energy, scatter – from 1.5 to 27 (less often up to 30) J.

Depending on the power of the impact, restrictions are imposed as possible for specific tasks: it is not recommended to use high impact perforators for soft and fragile materials – like wood, crumbling concrete, brick. This leads to the formation of multiple cracks. At the same time, with insufficient impact power for dense stone, concrete, it will take a much greater time of work.

The predominant type of impact is pneumatic. It is used in drilling mode (with a blow) and detection (without drilling). In low -power perforators, the impact function can cause rapid wear of mechanisms.

The impact force is associated with the power of the electric motor and does not depend on the user forces.

The reverse function helps easily twist the drill from the material of the jamming prize.

The power of the perforator with electronic reverse is much lower than with the brush. The brush reverse also extends the resource of the electric motor collector.

When working with an electronic reverse, often the problem of breakdown of an overhead flag arises. This cannot happen with brush reverse, since it does not have this mechanism.

Vibration protection (anti -vibration technologies) in a perforator is a whole complex of elements (for example, a rubberized handle or lining) and combinations of devices that reduce the negative impact on the user. With direct single contact, the vibration and recoil can prevent the instrument to control effective control, and with prolonged, they cause professional hands. The value of exposure depends on the power and power of the device’s impact – mainly professional. Household perforators can be produced without vibration protection.

Each company has its own special developments in the field of control over vibrational impact.

Plus, the presence of such systems is not only in a long -term effect. Work with a perforator equipped with an anti -vibration component is easier, the user gets tired less, including the total life of the tool.

The weight of the punch is affected by power indicators, the design of the case – its dimensions, the type of handle, as well as the weight of removable working elements and cord. The weight varies from 1 to 11 kg.

Professional technology always has more weight than any other. Therefore, if the perforator is required for periodic use outside commercial activity, it is not profitable to purchase a pro-level of a solid level with a large weight. It is more difficult to transfer it and it will require additional transportation conditions.

The impact force for the perforator indicates how powerful the unit effect of the working element on the material will be. It is calculated in units of energy, scatter – from 1.5 to 27 (less often up to 30) J.

Depending on the power of the impact, restrictions are imposed as possible for specific tasks: it is not recommended to use high impact perforators for soft and fragile materials – like wood, crumbling concrete, brick. This leads to the formation of multiple cracks. At the same time, with insufficient impact power for dense stone, concrete, it will take a much greater time of work.

The predominant type of impact is pneumatic. It is used in drilling mode (with a blow) and detection (without drilling). In low -power perforators, the impact function can cause rapid wear of mechanisms.

The impact force is associated with the power of the electric motor and does not depend on the user forces.

The maximum drilling diameter for the perforator means, firstly, the presence of the function of drilling wood, and secondly, the maximum permissible values ​​of this parameter.

Scatches of values ​​from 10 to 105 mm.

When drilling such a material, the use of a vacuum cleaner is recommended, which can be removable (including paper). The use of the drilling function with a blow to the woody canvas is not recommended – this leads to its destruction, warping, the formation of cracks and the holes are uneven.

The maximum diameter of steel drilling – from 10 to 32 mm – reflects the ability of the perforator to effect on the most complex and stable material. The diameter of the drilling corresponds to the diameter of the created hole.

Steel drilling is one and the most time -consuming processes that requires optimal performance from the device (so as not to deform thin steel sheets and not change the Fomer of the structure), as well as the stability of the technique to loads (protection of the engine from overheating).

The value of this parameter is depending on the type of cartridge and the size of the drill. For some types of perforators, the adapter is required to drill.